南京2KLH050-10亚德客角座阀

1 pneumatic control. Can be used in the absence of electricity, flammable and explosive occasions, low starting pressure, low pressure can be used to control high pressure;

2 body, connecting rods and other parts of stainless steel material, has a strong anti rust ability, the use of cast fluorine material seal, wide application, can be used for high temperature, strong corrosive liquid;

3 body 45 degree angle seat structure, cavity streamline design, reduce the flow resistance, flow more smoothly, so as to achieve large flow, the connecting rod to increase the filter element, avoid impurities into, prolong the service life;

4 the actuator is equipped with a visual position indicator, which can be used to observe the size of the angle valve switch and adjust the size of the flow.

5 actuator control gas port with embedded metal connector, the use of the connection plate to facilitate the installation of NAMUR solenoid valve;

6 actuator can be rotated 360 degrees, easy to install.

2KLH050-10亚德客高压型不锈钢流体控制阀
1.采用气控。可在无电、易燃易爆等场合使用，启动气压低，可用低压控制高压；

2.本体、连接杆等零件采用不锈钢材料，有超强的防锈能力，采用铸氟龙材质密封，应用场合广，可用于高温，强腐蚀性等液体；

3.阀体45°角座结构，内腔流线型设计，减少流道阻力，流动更平缓，从而实现大流量，连接杆增加滤芯，避免杂质进入，延长使用寿命；

4.执行器配有可视位置指示窗，可观察角阀开关大小且可调节流量的大小，也可将指示窗换为限位开关或紧急手动装置。

5.执行器控制气口采用嵌入式金属接头，采用过度连接板方便安装NAMUR电磁阀；

6.执行器可360°旋转，安装方便。