点击图片查看原图
Product structure:
Pneumatic solenoid valve in a closed chamber, at different locations to open a hole, each hole pneumatic solenoid valve is leading to a different pipeline, the middle valve chamber, both sides are two electromagnets, which face the magnet coils body will be attracted to which side;
Pneumatic solenoid valve through the control valve moves different oil discharge to block or leakage of the hole, and the oil inlet hole Shichang opened, hydraulic oil will enter the drain pipes of different pressure, and then through the pneumatic electromagnetic valve oil to push the piston oil just, this current by controlling pneumatic solenoid valve the control of the electromagnetic valve mechanical movement.
Pneumatic solenoid valve is used to control fluid automation infrastructure components, belonging to the actuator; pneumatic solenoid valve is not limited to hydraulic, pneumatic; pneumatic hydraulic solenoid valve used to control the flow direction, the mechanical plant are usually composed of hydraulic steel or solenoid valve to control.
产品结构：
气动电磁阀里有密闭的腔，在的不同位置开有通孔，气动电磁阀的每个孔都通向不同的油管，腔中间是阀，两面是两块电磁铁，哪面的磁铁线圈通电阀体就会被吸引到哪边；
气动电磁阀通过控制阀体的移动来档住或漏出不同的排油的孔，而进油孔是常开的，液压油就会进入不同的排油管，然后通过气动电磁阀的油的压力来推动油刚的活塞，这样通过控制气动电磁阀的电磁铁的电流就控制了整个电磁阀的机械运动。
气动电磁阀是用来控制流体的自动化基础元件，属于执行器；气动电磁阀并不限于液压，气动；气动电磁阀用于控制液压流动方向，工厂的机械装置一般都由液压钢或电磁阀来控制。
Characteristic：
1, the pilot way: internal guide or external boot optional;
2, sliding column structure, good sealing, sensitive reaction;
3, double head solenoid valve with memory function;
4, the hole using special processing technology, friction resistance, low starting pressure, long service life;
5, no oil lubrication;
6, with a manual device for installation and commissioning;
7, there are a variety of standard voltage levels available for selection;
8, can be integrated with the base valve group, saving installation space.
特点：
1、先导方式：内部引导式或外部引导式可选；
2、滑柱式结构，密封性好，反应灵敏；
3、双头电磁阀具有记忆功能；
4、内孔采用特殊加工工艺，磨擦阻力小，启动气压低，使用 寿命长；
5、无需加油润滑；
6、附设手动装置，利于安装调试；
7、有多种标准电压等级可供选用；
8、可与底座集成阀组，节省安装空间。
