点击图片查看原图
In order to maintain the original performance of Yangzhou INA bearing in a good state as long as possible, it must be maintained and overhauled to prevent the accident, ensure the reliability of the operation and improve the production and economy.
保养zui 好相应机械运转条件的作业标准，定期进行。内容包括监视运转状态、补充或更换润滑剂、定期拆卸的检查。
Maintain the best operating standards for the corresponding mechanical operation conditions and carry out them regularly. The contents include monitoring operation status, replenishment or replacement of lubricants, and regular disassembly inspection.
作为运转中的检修事项，有扬州INA轴承的旋转音、振动、温度、润滑剂的状态等等。
As a matter of overhaul in operation, there are revolving sound, vibration, temperature, lubricant status of Yangzhou INA bearing and so on.
扬州INA轴承的清洗：拆卸下轴承检修时，首先记录轴承的外观，确认润滑剂的残存量，取样检查用的润滑剂之后，洗轴承。作为清洗剂，普通使用清洗剂、煤油。
Yangzhou INA bearing cleaning: When dismantling lower bearing maintenance, first record the appearance of bearing, confirm the residual amount of lubricant, after sampling and checking the lubricant, wash bearings. As cleaning agents, cleaning agents and kerosene are commonly used.
拆下来的扬州INA轴承的清洗，分粗清洗和细清洗，分别放在容器中，先放上金属的网垫底，使轴承不直接接触容器的脏物。粗清洗时，如果使轴承带着脏物旋转，会损伤轴承的滚动面，应该加以注意。在粗清洗油中，使用刷子清除去润滑脂、粘着物，大致干净后，转入精洗。
The dismantled Yangzhou INA bearings are cleaned with coarse cleaning and fine cleaning. They are placed in the container respectively. The metal mesh bottom is put on the bottom of the metal mesh, so that the bearing does not contact the body of the container directly. In rough cleaning, if the bearing rotates with the dirt, it will damage the rolling surface of the bearing, so we should pay attention to it. In crude oil wash, remove grease and adhesive with brush. After cleaning, turn to fine wash.
精洗，是将扬州INA轴承在清洗油中一边旋转，一边仔细的清洗。另外，清洗油也要经常保持清洁。
Fine cleaning is to wash the INA bearing of Yangzhou in the cleaning oil while cleaning. In addition, the cleaning oil should always be kept clean.
扬州INA轴承的检修和判断：为了判断拆卸下来的轴承是否可以使用，要在轴承洗干净后检查。检查滚道面、滚动面、配合面的状态、保持架的磨损情况、轴承游隙的增加及有无关尺寸精度下降的损伤，异常。非分离型小型球轴承，则用一只手将内圈支持水平，旋转外圈确认是否流畅。
Maintenance and judgement of INA bearing in Yangzhou: in order to determine whether the dismantled bearing can be used, check after bearing cleaning. Check the raceway surface, rolling surface, mating surface condition, the wear condition of the cage, the increase of bearing clearance and the damage caused by unrelated dimension precision. The non separable small ball bearing supports the inner ring with one hand and checks the outer ring to confirm whether it is fluent or not.
文章来自：扬州SKF轴承 www.wh-skf.com
The article comes from: Yangzhou SKF bearing www.wh-skf.com
文章来自：扬州INA轴承 www.ina-china.cn
The article comes from: Yangzhou INA bearing www.ina-china.cn
文章来自：扬州NSK轴承 www.klbbearings.com
The article comes from: Yangzhou NSK bearing www.klbbearings.com
QQ：524085168
电话：0510-81207777
手机：13311666672
